Antique Fusee Wall Clocks
Winding
Once a week in a clockwise direction, wind the clock gradually until the key comes to a stop.
Hand Setting
The minute hand should only be moved forwards and NEVER backwards.
Regulation (Time Keeping/Running Speed)
This is done by the nut on the bottom of the pendulum. Often at the pendulum bob is a collar with a V notch in it, if it has one make sure the bob is always sitting correctly in the notch. If there are two nuts under this, then one is used to tighten the bottom nut against it. Turn the nut to the right (clockwise) to go faster and to the left (anti clockwise) to go slower. The shorter a pendulum is the faster the clock goes. To slow a clock down, make the pendulum longer by adjusting the ‘rating’ nut below the pendulum. Just one revolution in the required direction per day and always reset the hands to time. Patience is required to achieve results, do not rush the process.
Putting your clock into beat (even tick)
This must be even in order that the clock continues to function. Swing the pendulum gently and listen – if you are not sure whether it is even or not try moving one side of the case to the left by pivoting on its mounting slightly and listen to see what that sounds like. If the tick sounds more uneven stop and move to the right. Moving the clock a millimetre or two can make the difference to your clock running and ticking evenly or not. Some clocks swing to the side when the door is open to wind, it helps putting blue tack at the rear of the clock case to hold it steady and stop it slipping. This also helps when putting into beat, you can slide the clock to the correct position and hold in place by bedding in the blue tack.
Maintenance
To maintain the clock you should have it checked and serviced every 4-5 years. Do not attempt to oil a clock yourself. This should be done by a qualified repairer. Over-oiling a clock can affect the running and condition of the clock.
How we work
Collection and Inspection Service
We are a specialist clock workshop offering a full collection and delivery service. Upon request, we will arrange an appointment to collect your clock from your address.
Once it arrives at our workshop, we will conduct a thorough inspection and provide a detailed condition report, a fixed-price quote for the required work and an estimated completion timescale.
This service is free and without obligation. If you choose not to proceed, we will return your clock at no cost.
Repair Process and Payment Terms
If you decide to proceed with the repair or restoration, we require a 50% deposit upon instruction. The remaining balance is payable once the work is completed, prior to delivery.
Our skilled team ensures all work is carried out to the highest standards, with clear communication throughout the process.
Delivery, Setup and Care Guidance
Once the work is complete, we will schedule an appointment to deliver and set up your clock. During delivery, we will explain the best practices for operating and maintaining your clock.
Typical turnaround times for servicing and repairs are 10 weeks.